The NZXT H510 Elite Mid-Tower Case features a sleek and minimalistic design with plenty of helpful additions for a clean and easy build. Aside from its signature cable management bar, it also has a PSU shroud and a built-in cable management system at the back. It supports up to an ATX motherboard, three 2.5" or 3.5" drives, and three dual-slot graphics cards. Alternatively, you can install a single dual-slot graphics card vertically using an optional riser cable. Whether you choose to liquid cool or not, the H510i supports up to two 120/140mm fans at the front, a 120/140mm fan at the rear, and another 120/140mm fan at the top. Thanks to its tempered-glass front and side panels, you can show off your hardware along with any custom LED lighting. This case comes with NZXT's CAM-powered Smart Device, which is a fan and RGB LED lighting control unit. Compared to the H510i, this Elite version includes two AER RGB 2 140mm fans, a 140mm AER F140 fan instead of a 120mm one, and a tempered-glass front panel.

NZXT CAM lighting and fan control device features three 10W fan channels and two RGB LED ports that supports up to four HUE+ LED strips or five Aer RGB/RGB2 fans

Note: If a splitter is used, fan control is regulated depending on the fan connected to the 4-pin port. Do not use low-noise adapters.

Front USB 3.1 Gen 2 Type-C port with speeds of up to 10 Gb/s
Cable management bar and cable routing channels
Additional 2.5" drive mounting on top of the PSU shroud and behind the motherboard tray
Removable fan/radiator mounting bracket
2 x 140mm AER RGB 2 fluid-dynamic bearing fans included

500 – 1500 rpm
30.39 – 91.19 CFM
22 – 23 dBA
0.17 – 1.52mm/H2O

1 x 140mm AER F140 case fan included
1 x 120 mm Aer F120 rifle-bearing fans included

1200 +/- 200 rpm
50.42 CFM
28 dBA